LPT_Switch

LPT_Switch - A program that uses the LPT port to selectively turn on / off up to 12 network or any other electrical appliances in several ways. Supports operation in the logic controller mode and according to the prepared script. Line management can be performed in the following main ways: manually; Five sensors; The contents of two text files f1 and f2; By the timer (schedule); From any computer on the local network, if it has the LPTS_Client application installed on it. The program LPT_Switch is able to work on a prepared script (script) - turn on / off lines and playback of specified wav or mp3 files in real time with mixing (simultaneous playback) of different sounds. Also work in the mode of the logic controller is supported - the program of line management prepared by the user is executed. The hot line control keys included in the LPT_Switch interface allow you to work with remote controllers in conjunction with programs such as "Intercept", SlyControl, etc. Software emulation of keystrokes on the keyboard depending on the status of the sensors. LPT_Switch supports software emulation of keystrokes on the keyboard depending on the status of the sensors. The sensors can be simple contacts or any devices that have an open or closed contact in the standby mode, there should not be any voltage on the output contacts. It is possible to take into account the time of work, the consumed electricity (a kind of three-rate electricity meter) and cash costs for the reporting period for each line and for all lines in total (total). To run the program, it is necessary to have an appropriate connector for connecting to the LPT and to assemble an uncomplicated circuit of the control unit for external devices.