1000Mbps Gigabit Ethernet SFP PLANET MGB-L50 Mã sản phẩm: MGB-L50
1000Mbps Gigabit Ethernet SFP PLANET MGB-L50
-Mini GBIC LX Module – up to 50km.
-1000Mbps Gigabit Ethernet SFP Fiber Transceiver modules operate with an integrated duplex data link over single mode optical fiber. These Small Form Factor Pluggable (SFP) transceivers work with PLANET’s Gigabit SFP interface to provide a reliable, high-performing Gigabit Ethernet network. The device’s hot pluggable feature enables network administers to easily install SFP MSA compliant ports without interrupting the host equipment in operation.
Đặc tính kỹ thuật
| PHY Type | IEEE 802.3z 1000BASE-LX |
| Fiber Type | Single Mode |
| Connector | LC |
| Wavelength | 1310nm |
| Maximum Distance | 50km |
| Operating Temperature | 0 ~ 60 degrees C |
Brand
Planet
Related products
• High quality 19" Rack-mountable Chassis installation
• Supports up to 15 modular media converters
• Two fans brings air-flow to cool system, and LED indicators for system and fan status
• Bay power isolation to ensure each bay is electrically isolated from each other
• Supports multiple converters - 10/100/1000Mbps, copper, fiber, single/multi-mode ST/SC/MTRJ connectors
• Reduces the effort of converter maintenance and management, diagnose the status at one time
• Cost-effective, easy to install
24-port Gigabit Switch PLANET WGSW-24040R
-24-Port Gigabit with 4-Port SFP Layer 2+/4 SNMP Managed Switch.
-Routing Protocols: IPv6 software static routing.
-WGSW-24040R series offers comprehensive layer2 to layer4 access control list (ACL) for enforcing security to the edge.
-Reset Button: < 5 seconds: System reboot, > 5 seconds: Factory default.
- LED: Power, fan alert, 10/100/1000 Link / Act per RJ45 port, 100/1000 Link/ Act per SFP port.
-Power: -48V DC @ 0.6A, DC voltage range: 30 ~ 60V.
-Power Consumption: Max. 21.0 watts / 71.652 BTU.
-Dimensions: 440 x 200 x 44.5mm, 1U high.
-Weight: 2850g.
- 16 cổng RJ45 10/100/1000BASE-T
- 2 cổng quang SFP 100/1000BASE-X
- Các tính chất Store-and-Forward mode với các tốc độ dây và forwarding.
- Hỗ trợ 8K cho các địa chỉ MAC.
- Hỗ trợ 9K cho gói Jumbo.
- Hỗ trợ chức năng Auto-MDI/MDI-X.
- Hỗ trợ giao thức CSMA/CD.
- Thiết kế theo chuẩn A: FCC, CE.
- Tuân theo chuẩn IEEE 802.3u 100 BaseTx,100Base-FX Ethernet
Kết nối : 1 cáp xoắn RJ 45( Auto MDI/MDI-X), tuân theo chuẩn EIA 568 IEEE802.3,IEEE802.3 10/100Base TX, 100BaseFX
- Cáp quang bước sóng 1310nm
- Tốc độ truyền dữ liệu TP : 10/100 Mbps, FX : 100Mbps
- Hỗ trợ chế độ song công
- Full hoặc Half Duplex Auto Negotiation (TP)
- Full hoặc Half duplex DIP-Switch (FX)
- Đèn chỉ thị : PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
- Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
- One box design, CO / CPE selectable via DIP Switch
- Defines symmetric band plan for the transmission of upstream and downstream signals
- Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- Built-in POTS splitter to share voice and data
- Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POST connection
- Voice and data communication can be shared simultaneously based on the existing telephone wire
- Four 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X
- Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
- Hardware IGMP Snooping for Multimedia service
- VDSL2 stand-alone transceiver for simple bridge modem application
- Advantage of minimum installation time (Simply as Plug-and-Play)
- Selectable target profile and target SNR margin
- Supports extensive LED indicators for network diagnosis