1000Mbps Gigabit Ethernet SFP PLANET MGB-L30 Mã sản phẩm: MGB-L30
1000Mbps Gigabit Ethernet SFP PLANET MGB-L30
-Mini GBIC LX Module – up to 30 km.
-1000Mbps Gigabit Ethernet SFP Fiber Transceiver modules operate with an integrated duplex data link over single mode optical fiber. These Small Form Factor Pluggable (SFP) transceivers work with PLANET’s Gigabit SFP interface to provide a reliable, high-performing Gigabit Ethernet network. The device’s hot pluggable feature enables network administers to easily install SFP MSA compliant ports without interrupting the host equipment in operation.
Đặc tính kỹ thuật
PHY Type | IEEE 802.3z 1000BASE-LX |
Fiber Type | Single Mode |
Connector | LC |
Wavelength | 1310nm |
Maximum Distance | 30km |
Operating Temperature | 0 ~ 60 degrees C |
Brand
Planet
Related products
- 10/100Mbps Copper Ports : 16 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
- Gigabit Copper Ports : 2 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
- SFP/mini-GBIC Slots : 2 1000Base-X SFP interfaces, shared with Port-17 to Port-18
- FGSW-1816HPS cung cấp nguồn PoE trên 16 cổng vơi công suất 30W IEEE 802.3at thông qua giao diện RJ-45 và 2 cổng combo TP/SFP hỗ trợ tốc độ truyền cao cho giám sát hình ảnh
- Hỗ trợ 24 cổng 10/100 Mbps Base-T với tính năng cấp nguồn PoE IEEE 802.3at/af
- Hỗ trợ 2 cổng 10/100/1000 Base-T
- Hỗ trợ 2 khe cắm mini gbic 1000 Base-X. shared với cổng 25, 26
- Hỗ trợ phím reset cho phép thiết lập lại cấu hình măc đinh
- 2-Port RJ-45 interfaces
- - 1-Port Data + Power input
- - 1-Port Data output
- 1-Port DC output power socket
- 1 DC 12V/19V/24V DIP switch
- Ultra Power over Ethernet End-Span / Mid-Span PSE
- IEEE 802.3at/af PoE standard compliant
- Compatible with All IEEE 802.3at/af Powered Devices
- Supports 56VDC, 50pwatt PoE power output
- Splits the 56V DC power over RJ-45 Ethernet cable into DC 12V/19V/24V output
- Remote power feeding up to 100 meters
- Metal case
- All-in-one compact size design
- LED indicators for Power LED and POE input
- Three-mode DC output DIP switch for 12V/19V/24V
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3ab 1000Base-T
- IEEE 802.3at High Power over Ethernet
- IEEE 802.3af Power over Ethernet
- FCC Part 15 Class A, CE
Interface
- Tuân theo chuẩn IEEE 802.3u 100 BaseTx,100Base-FX Ethernet
Kết nối : 1 cáp xoắn RJ 45( Auto MDI/MDI-X), tuân theo chuẩn EIA 568 IEEE802.3,IEEE802.3 10/100Base TX, 100BaseFX
- Cáp quang bước sóng 1310nm
- Tốc độ truyền dữ liệu TP : 10/100 Mbps, FX : 100Mbps
- Hỗ trợ chế độ song công
- Full hoặc Half Duplex Auto Negotiation (TP)
- Full hoặc Half duplex DIP-Switch (FX)
- Đèn chỉ thị : PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
48-port 100/1000Mbps Switch PLANET GS-5220-44S4C
-L2+/L4 48-Port 100/1000X SFP with 4 Shared TP Managed Switch, with Hardware Layer3 IPv4/IPv6 Static Routing.
-Supporting both IPv6 and IPv4 protocols.
-GS-5220-44S4C is a Layer 2+ Managed Gigabit Switch that features 44-Port 100/1000BASE-X + 4-Port Gigabit TP/SFP Combo, provides high-density performance and supports Hardware static Layer 3 routing in a 1U case.
-With total 96Gbps high performance switch architecture, the GS-5220-44S4C can handle extremely large amounts of data in a secure topology linking to a data center / campus / telecom backbone or high capacity servers.
-Each of the SFP slots supports Dual-Speed, 100BASE-FX and 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP transceiver modules according to the transmission distance or the transmission speed required to extend the network efficiently.
-Address Table: 16K entries, automatic source address learning and ageing.
- Power: 100~240VAC, 50/60Hz.
-Power Consumption: 45 watts.
-Dimensions: 440 x 300 x 44.5 mm, 1U height.
-Weight: 3765g.
- Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
- One box design, CO / CPE selectable via DIP Switch
- Defines symmetric band plan for the transmission of upstream and downstream signals
- Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- Built-in POTS splitter to share voice and data
- Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POST connection
- Voice and data communication can be shared simultaneously based on the existing telephone wire
- Four 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X
- Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
- Hardware IGMP Snooping for Multimedia service
- VDSL2 stand-alone transceiver for simple bridge modem application
- Advantage of minimum installation time (Simply as Plug-and-Play)
- Selectable target profile and target SNR margin
- Supports extensive LED indicators for network diagnosis