|
Model |
RPT-600 (A/AP) |
RPT-800 (A/AP) |
RPT-1000 (A/AP) |
|
|
Capacity |
600VA/360W |
800VA/480W |
1000VA/600W |
|
| INPUT | Voltage |
100V / 110V /115V / 120V ±25% |
||
| Frequency |
50Hz / 60Hz ±10% auto sensing |
|||
| OUTPUT | Voltage (Backup mode) |
100V / 110V /115V / 120V (±5% on battery) |
||
| AVR |
AVR with 1 step boost and 1 step buck |
|||
| Frequency (Backup mode) |
50Hz / 60Hz ±1% |
|||
| Waveform |
Simulated sine wave |
|||
| Connections |
*Please refer below “Receptacle Options”. Customized receptacle can be discussed. |
|||
| Transfer time |
2 to 4 millisecond including detection time (typical) |
|||
| PROTECTION | Overload |
UPS automatic power off if overload exceeds 110% of nominal at 60 seconds; 130% at 3 seconds |
||
| Unit Input |
*Optional – Fuse or overload & short circuit protection |
|||
| Tele-communication |
*Optional – none or RJ45 |
|||
| Alarm |
Buzzer beeps under backup mode, battery low, battery charging fault, and overload |
|||
| BATTERY | Type |
Sealed, maintenance-free lead acid battery |
||
| Typical recharge time |
3-4 hours to 90% |
|||
| Battery quantity |
12V 7Ah x1 |
12V 7.2Ah x1 |
12V 9Ah x1 |
|
| Protection |
Automatic diagnostics, over-discharge and short circuit protection |
|||
| STANDARDS | Dimension (W x D x H) |
100mm x 278mm x 140mm |
||
| Net weight |
4.3kg |
4.8kg |
5.4kg |
|
| Display |
LED indicator |
|||
| Communication interface |
*Optional – none or USB B-type |
|||
| Audible noise |
< 40dBA (1m from surface) |
|||
| Ambient operation |
Maximum elevation at 2000m, 0 to 40℃, 0 to 95% humidity (non-condensing) |
|||
| Storage condition |
Maximum 2000m |
|||
