| Hardware Specifications | |
| 10/100Mbps Copper Ports | 16 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports |
| Gigabit Copper Ports | 2 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports |
| SFP/mini-GBIC Slots | 2 1000Base-X SFP interfaces, shared with Port-17 to Port-18 |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 7.2Gbps / non-blocking |
| Throughput | 5.35Mpps@64Bytes |
| Address Table | 4K entries, automatic source address learning and ageing |
| Share Data Buffer | 2.75Mb embedded memory for packet buffers |
| Flow Control | IEEE 802.3x pause frame for full-duplex |
| Back pressure for half-duplex | |
| Maximum Transmit Unit size (MTU size) | 1536 Bytes |
| Reset Button | < 5 sec: System reboot |
| > 5 sec: Factory Default | |
| Dimensions | 440 x 200 x 44.5 mm, 1U height |
| Weight | 2.55kg |
| LED | System: |
| Power (Green) | |
| 10/100Base-TX RJ45 Interfaces (Port1 to Port16) | |
| 10/100Mbps LNK/ACT (Green) | |
| PoE In-Use (Orange) | |
| 10/100/1000Base-T RJ45 / SFP Interfaces (Port17 to Port18): | |
| LNK/ACT (Green) | |
| 100/1000 (Green) | |
| PoE Usage: 50W, 100W, 150W, 190W (Orange) | |
| Cable Twisted-Pair | 10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters |
| 100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters | |
| 1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters | |
| Cable Fiber-Optic Cable | 1000Base-SX: |
| 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m | |
| (varying on SFP module) | |
| 1000Base-LX : | |
| 9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 | |
| kilometers (varying on SFP module) | |
| Power Requirements | 100~240VAC, 50/60Hz, 4A |
| Power Consumption | Max. 240 watts / 816 BTU |
| ESD Protection | 2KVDC |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3af / 802.3at PoE / PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per Port 52V DC, Max. 30.8 watts |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Budget | 220 watts (max.) |
| PoE Ability PD @ 7 watts | 16 units |
| PoE Ability PD @ 15.4 watts | 14 units |
| PoE Ability PD @ 30.8 watts | 7 units |
| Layer 2 Functions | |
| Port Configuration | Port disable / enable |
| Auto-negotiation 10/100/1000Mbps full and half duplex mode selection | |
| Flow Control disable / enable | |
| Port Status | Display each port’s speed duplex mode, link status, flow control status, auto negotiation status and trunk status |
| Port Mirroring | TX / RX / Both |
| Many-to-1 monitor | |
| VLAN | 802.1Q tagged-based VLAN, up to 32 VLAN groups, out of 4094 VLAN IDs |
| Port-based VLAN, up to 18 VLAN groups | |
| MTU VLAN | |
| Link Aggregation | 2 groups of 4-Port 10/100Base-TX trunk supported |
| 1 group of 2-Port 10/100/1000Base-T trunk supported | |
| QoS | Allow to assign low / high priority on each port |
| First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy | |
| IGMP Snooping | IGMP (v1/v2) Snooping, up to 32 multicast groups |
| Security Control | MAC address binding |
| TCP & UDP filter | |
| Management Functions | |
| Basic Management Interfaces | Web Browser, SNMP v1 |
| Standards Conformance | |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3 Ethernet |
| IEEE 802.3u Fast Ethernet | |
| IEEE 802.3ab Gigabit Ethernet | |
| IEEE 802.3z Gigabit Ethernet | |
| IEEE 802.3x Full-duplex flow control | |
| IEEE 802.1Q VLAN | |
| IEEE 802.1p QoS | |
| IEEE 802.1D Spanning Tree Protocol | |
| IEEE 802.1w Rapid Spanning Tree Protocol | |
| IEEE 802.3af Power over Ethernet | |
| IEEE 802.3at Power over Ethernet Plus | |
