Software
SUPPORT_X Is a system for collecting loads, calculating foundations of foundations and intermediate supports of road, railway and pedestrian bridges (any dimensions of the carriageway, with cut and continuous span structures, bridges on curves, and oblique overpasses) for the following loads and their combinations:
- Constant loads from the action of the ground and the weight of the structures;
- Temporary vertical loads (with concomitant horizontal loads): SK - for railway bridges, AK and load from the crowd - for road bridges;
- Wind load taking into account the dynamic component;
- Soil pressure from the temporary load on the collapse prism (for foundations);
Ice loads (for channel supports);
Loads from the bulk of ships (for bridges on navigable rivers);
Seismic loads with seismicity from 7 to 9 points.
In addition to calculating the time and constant loads, as well as their combinations in any section of the support, if you specify the calculated cross-section in the basement / grill bottom level, the program
SUPPORT_X Carries out:
For foundations on a natural base - Checking the load-bearing capacity of the foundation soil and the underlying soil layers;
- Check the foundation for the rollover (the position of the resultant external forces) and the shift.
For pile foundations: - Calculation of effort in the heads and along the length of the piles;
- Detection of extreme efforts in piles for inspections and calculation of pile reinforcement;
- Check piles on the ground for vertical loads;
- Checking the pile pressure on the ground along the side surface;
- Checking the bearing capacity of the soil at the base of the piles (as for the conventional massive foundation) and the underlying layers of the soil (as for the conventional massive foundation);
- Checking the load-bearing capacity of the pile in the rocky ground (for piles buried in the rock);
- Pile test on the impact of frost soil under SNIP 2.02.04-88.
SUPPORT_X Supports operating systems Windows 9x / 2000/2003 / NT / XP / Vista. For the program
SUPPORT_X Issued a certificate of compliance ROSS RU.SP15.N00220 dated March 17, 2009.
Restrictions of SUPPORT_X: - Number of stages of support: from 2 to 10.
- Number of span structures: up to 30.
- Number of piles: up to 160.